|
Give your guests the hottest drinks around with a martini glass etched with scorching flames. Choose glasses with shapes, colors and designs that make the flames look even hotter. The martini glasses we found have orange and red spirals swirling around the stem, which reminded us of hot coals. Wow does that looks hot or what! Materials: #15-0200 Armour Etch Glass Etching Cream. #21-1669 Over N Over stencil-Flames #08-9606 Brushes. #08-9999 Gloves. #08-9415 Masking tape. Martini glasses Soft paper towels. Directions: 1. Wash the glass in hot, soapy water and dry with soft paper towels 2. Fit the flame stencils around the rim and up from the bottom of the glass. 3 .Cover the entire rest of the glass with masking tape, overlapping all edges. 4. Put on the rubber gloves. Load the brush with Armour Glass Etching cream. PAT the etch cream onto the stencil (do not brush it on) in a random pattern until the stencil is thoroughly covered with a 1/4 inch of cream. View the directions and How To Videos HERE. 5. Leave cream on for 5 minutes 6. Turn the glass upside down so no water will go inside it while rinsing. Rinse off all of the etching cream off under running water. Remove the stencil and masking tape and rinse again. Pat the stencil dry and return to the carrier sheet. |