Cowboy Hat Tumbler Glass

Handsome cowboy tumbler has everything a lover of cowboys and the old west could want!

Materials:

#15-0200 Armour Etch Glass Etching Cream.

#21-1677 Over N Over stencil- Horses

#21-1633 Over N Over stencil- Western

#08-9606 Brushes.

#08-9999 Gloves.

#08-9415 Masking tape.

16 oz or larger tumbler glasses

Soft paper towels.

Directions:

1. Wash the glass in hot, soapy dish water and dry soft paper towels

3. Apply the cowboy hat stencil to the upper part of the glass as shown. Mount the horse border stencil right below it, overlapping the edges top to bottom

4 .Cover the glass around the stencils with masking tape, overlapping all edges. Cover all the way up to the rim and well off to the sides.

5. Put on the rubber gloves. Load the brush with Armour Glass Etching cream. PAT the etch cream onto the stencils (do not brush it on). Cover each one with a 1/4 inch layer of cream. View the directions and How To Videos HERE.

6. Leave cream on for 5 minutes

7. Hold the glass upside down so no water will go on the inside while rinsing. Rinse off all of the etch cream. Remove the stencil and masking tape and rinse again. Pat the stencil dry and return to the carrier sheet.

8. Repeat border on other side of the glass if it did not etch all the way around the first time.