Etched Oriental Tea Light

SUPPLIES:

• #70-9001 Starter Sand Etch® Kit
• #70-9220 Sand Etch® Stencil Oriental Tree
• #08-9415 Masking Tape
• #08-9777 Scissors
• #15-0315 Glass Cleaner
• Tea Light
• Running Water
• Paper towels and Newspaper
• Cardboard Box

INSTRUCTIONS:

1. Begin by cleaning the glass thoroughly with glass cleaner.
2. Cut out the design from the stencil sheet.
3. Tape your stencil design to the glass. Start at one end and smooth out the stencil to the other end.
4. Mask off all exposed glass to avoid unwanted etching.
5. Begin to blast your project according to the detailed instructions found in the Sand Etch Kit. View the instructions and How To Videos. Hold the nozzle of the blaster approx 1 inch from the glass while blasting in a circular or zigzag motion. Hold the glass up to the light periodically to be sure all areas are etched.
6. Carefully remove stencil design, tape and paper to avoid scratching glass with any remaining abrasive.
7. Rinse project under running water to remove excess abrasive. Clean project with glass cleaner and dry with paper towels.
8. Return the glass to its holder, light a candle and admire your work.

* IMPORTANT: Please read your Sand Etch® manual for safety precautions.
Build a sandblast cabinet using a cardboard box.

Instructions included in all Sand Etch Kits.